某燃气电厂NOx排放测值异常分析与处理

某F级燃气电厂运行中发现NOx数值存在较大波动,通过分析和排查,发现烟气分析仪存在老化现象,同时CEMS仪表间存在布置不合理情况,通过处理NOx数值波动得以有效改善,可为同类电厂烟气系统数据异常处理提供参考。     

Hydrodistillation condition adjustment for different material particle sizes: a method to increase batch‐to‐batch quality consistency

Varying material particle sizes represent a common contributing factor to the batch‐to‐batch variation of extraction yields. To increase the batch‐to‐batch quality consistency of extracts, a method was proposed to adjust the extraction conditions for different material particle sizes, taking the hydrodistillation extraction process of Radix Curcumae and Fructus Gardeniae as a case study. Statistical models were built for five sesquiterpenes including curcumenone, curcumenol, curdione, curzerenone and furanodienone, to quantitatively describe the effects of particle size and process parameters on their extraction yields. An increase in sodium chloride concentration remarkably increased the yields of curcumenone and curcumenol, and a larger solvent‐to‐solid ratio increased the yields of five sesquiterpenes. Under the adjusted process parameters for two different particle sizes, the yield for each compound was controlled to fall in the 90–110% target range. The proposed method can be applied to various extraction processes of foods and herbal medicines.     

Ergonomics interventions to reduce musculoskeletal risk factors in a truck manufacturing plant

Ergonomic interventions may potentially reduce MSDs, but the context of industries (barriers, ever-changing situations, dialogue processes) might play a significant role in the success of interventions. This study evaluates the effectiveness of ergonomic interventions including engineering/technical and organizational interventions, and the involvement of the stakeholders in reducing musculoskeletal risk factors/symptoms. A pre-post-test experimental study in non-randomized groups was performed over three years in a sector of a truck assembly plant. The mean age of the operators in the sector for the initial and second assessment time was 42.0 (±7.6) years and 39.0 (±8.7), respectively. The mean length of work experience in the current job was 15.2 (±7.2) years and 13.9 (±7.3) for the initial and second assessment times, respectively. Five engineering ergonomic solutions and organizational interventions were implemented after a comprehensive ergonomic analysis. The organizational interventions consisted mostly of transferring and redistributing the tasks, i.e., ergonomically balancing and redesigning of the workstations. Before performing the interventions, the findings of the ergonomic study were presented at several meetings to encourage the involvement of the stakeholders (including managers, engineers, and operators) in the interventions. This study showed that a combination of ergonomic measures—engineering and organizational interventions—could reduce physical workloads. Musculoskeletal symptoms decreased after interventions although the difference was not significant.     

Design and thermodynamic assessment of a biomass gasification plant integrated with Brayton cycle and solid oxide steam electrolyzer for compressed hydrogen production

In this paper, a comprehensive thermodynamic evaluation of an integrated plant with biomass is investigated, according to thermodynamic laws. The modeled multi-generation plant works with biogas produced from demolition wood biomass. The plant mainly consists of a biomass gasifier cycle, clean water production system, hydrogen production, hydrogen compression, gas turbine sub-plant, and Rankine cycle. The useful outputs of this plant are hydrogen, electricity, heating and clean water. The hydrogen generation is obtained from high-temperature steam electrolyzer sub-plant. Moreover, the membrane distillation unit is used for freshwater production, and also, the hydrogen compression unit with two compressors is used for compressed hydrogen storage. On the other hand, energy and exergy analyses, as well as irreversibilities, are examined according to various factors for examining the efficiency of the examined integrated plant and sub-plants. The results demonstrate that the total energy and exergy efficiencies of the designed plant are determined as 52.84% and 46.59%. Furthermore, the whole irreversibility rate of the designed cycle is to be 37,743 kW, and the highest irreversibility rate is determined in the biomass gasification unit with 12,685 kW.     

Multiemotional product color design using gray theory and nondominated sorting genetic algorithm-III

When users select products, they consider the emotional experience resulting from the color of the product. However, the emotional demands of users for product color are multidimensional and diverse. It is very important yet difficult to accurately grasp multiemotional image requirements and effectively convert them into design elements. Therefore, multiemotional product color design (MEPCD) has become a very important and challenging research topic. In this article, a novel MEPCD system using gray theory (GT) and nondominated sorting genetic algorithm-III (NSGA-III) is proposed to effectively solve the MEPCD problem. First, the image perception spaces of users, which exist in different emotional dimensions, were collected using factor analysis and the semantic differential technique. Then, GT was used to establish a multidimensional emotional product color image evaluation model. Finally, NSGA-III was used to optimize and design a multiemotional color scheme for a product. Furthermore, according to actual conditions, an MEPCD system was established based on the proposed method. The design case study shows that the method and design system proposed in this article have a certain range of applicability and can effectively improve the practicality of MEPCD.     

某污水处理厂MBR膜系统改造与运行管理

某污水处理厂设计规模为10万t/d,采用AAO+MBR工艺,设计出水水质满足《城镇污水处理厂污染物排放标准》(GB 18918-2002)一级A标准。由于运行时间较长,MBR运行系统存在产能下降、膜丝断丝脱落、污堵和清洗频次以及强度增加等问题,严重影响正常生产运行。针对MBR系统运行中存在的问题,文中提出具体改造建议,并总结运行经验,进一步优化MBR膜系统的运行维护管理,为其他污水厂MBR膜系统运行问题提供解决思路和维护管理经验。     

Fluidic origami with embedded pressure dependent multi-stability: a plant inspired innovation

Inspired by the impulsive movements in plants, this research investigates the physics of a novel fluidic origami concept for its pressure-dependent multi-stability. In this innovation, fluid-filled tubular cells are synthesized by integrating different Miura-Ori sheets into a three-dimensional topological system, where the internal pressures are strategically controlled similar to the motor cells in plants. Fluidic origami incorporates two crucial physiological features observed in nature: one is distributed, pressurized cellular organization, and the other is embedded multi-stability. For a single fluidic origami cell, two stable folding configurations can coexist due to the nonlinear relationships among folding, crease material deformation and internal volume change. When multiple origami cells are integrated, additional multi-stability characteristics could occur via the interactions between pressurized cells. Changes in the fluid pressure can tailor the existence and shapes of these stable folding configurations. As a result, fluidic origami can switch between being mono-stable, bistable and multi-stable with pressure control, and provide a rapid ‘snap-through’ type of shape change based on the similar principles as in plants. The outcomes of this research could lead to the development of new adaptive materials or structures, and provide insights for future plant physiology studies at the cellular level.     

The role of non-visual aesthetics in consumer product evaluation

The present article addresses the impact of non-visual aesthetics of consumer products on the outcomes of usability tests such as perceived usability, user performance and user affect. Building on the research surrounding the impact of visual aesthetics in usability testing, the present work aimed to determine whether the same pattern of effects repeatedly found for visual aesthetics will also be found for non-visual aesthetics. A series of three experiments was carried out, all examining sound and touch as two prominent dimensions of non-visual aesthetics. To increase the robustness of the results, the experiments were conducted with three different consumer products, which were a smartphone (N=60), vacuum cleaner (N=60), and video racing game (N=60). Although manipulation checks confirmed that users generally experienced both sound and tactile product properties as intended by the experimental manipulation, in none of the studies the results showed an effect on perceived usability. Other outcome variables such as affect and performance showed a few selected effects. Overall, this suggests that findings from the field of visual aesthetics cannot be easily transferred to the domain of non-visual aesthetics. The findings of the present studies are discussed within the framework of Schifferstein’s work on sensory dominance.     

Performance improvement of a single-flash geothermal power plant in Dieng,Indonesia, upon conversion to a double-flash system using thermodynamic analysis

We investigated proposed design of a double-flash system and compared it to the existing single-flash power plant in Dieng, Indonesia, which uses waste brine from a high pressure separator. The performance of the double-flash system was evaluated using the second law of thermodynamics, and this was based on energy and exergy analyses. The Engineering Equation Solver (EES) was used to solve the relevant mathematical equations.Our results indicate that the double-flash design is interesting for application in Dieng since the power output would increase by 19.97%. Moreover, the precipitation system to avoid silica deposition in the injection well does not have to change much. Therefore, the building costs associated with the new double-flash system would be minimal. The available exergy from the reservoir is 66,204 kW based on the enthalpy determined by TFT (Tracer Flow Test) measurements. The single-flash power plant has a net power output of 23,400 kW with a second law efficiency of 36.7%. In the double-flash design, components such as a LPS, a second purifier and an HPT would be added to the plant. Furthermore, our calculations indicate that the power plant's output and second law efficiency would increase to 29,155 kW and 44.04%, respectively. The waste brine disposed of using this precipitation system would decrease by 8.22% at 5443 kW.     

燃机电厂管线综合布置分析与探讨

从工程实例出发,文章简单介绍了燃机电厂的管线特点,对厂区管线重点区域的具体布置方法进行了分析,以探讨在管廊通道与节约用地之间作出合理的选择。